Sonax ProfiLine Abrasive Glass Polish

Product Description:

Glass polish for removing slight scratches, dull and eroded spots from vehicle windscreens and side windows made from real glass. Chemical-mechanical polishing.

Directions for Use:

• Use of a polishing machine with regulating rotational speed is obligatory, a felt or solid polishing pad may be used as polish carrier.
• First clean the glass surface well.
• Slightly moisten the polishing pad with water.
• Apply a small amount of the product.
• At a low rotational speed, polish evenly over the windscreen, exerting moderate pressure. Work in overlapping movements without tilting.
• As soon as the polishing starts running dry, immediately spray on a little water. This cools the worked on surface, liquefies the polish again and enables an efficient chemical-mechanical polishing.
• The working time for a windscreen can take between 15 minutes. and an hour. In the mean time wipe over with a clean cloth and check the polishing effect.
• Afterwards, thoroughly clean the windscreen and surrounding area with Clear Glass and a soft cloth.

Please Note:

• Do not work in direct sunlight or on a hot windscreen.
• Polishing a windscreen is a demanding and costly process. For windscreens with deep scratches it may be more sensible to replace the windscreen. Windscreens with stone chips are fundamentally not to be polished.
• Never work for too long on one place, or apply too much pressure. Windscreens are subject to tension and can break.
• Protect against extreme cold.

Safety data:

• Change soaked clothing
• Ensure supply of fresh air.
• In case of contact with the skin, wash with soap and water and rinse thoroughly.
• In case of contact with eyes rinse thoroughly with water
• Do not induce vomiting. Refer for medical treatment.